Roland XV-5080. - Manual (Page 262)

262
Parameter List
35:CHORUS → DELAY(p. 62)
Parameter Value
Chorus
Pre Delay Chorus pre delay time 0.0-100.0 ms
Rate Chorus rate 0.05-10.00 Hz
Depth Chorus depth 0-127
Balance Chorus balance D100:0W-D0:100W
Delay
Time Delay time 0.0-500.0 ms
Feedback Delay Feedback level -98-+98%
HF Damp Delay HF damp 200-8000 Hz,
BYPASS (*1)
Balance Delay balance D100:0W-D0:100W
Output
Level Output level 0-127
1: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000 Hz, BYPASS
36:FLANGER → DELAY(p. 63)
Parameter Value
Flanger
Pre Delay Chorus pre delay time 0.0-100.0 ms
Rate Chorus rate 0.05-10.00 Hz
Depth Chorus depth 0-127
Feedback Delay Feedback level -98-+98%
Balance Chorus balance D100:0W-D0:100W
Delay
Time Delay time 0.0-500.0 ms
Feedback Delay Feedback level -98-+98%
HF Damp Delay HF damp 200-8000 Hz,
BYPASS (*1)
Balance Delay balance D100:0W-D0:100W
Output
Level Output level 0-127
1: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000 Hz, BYPASS
37:CHORUS → FLANGER(p. 63)
Parameter Value
Chorus
Pre Delay Chorus pre delay time 0.0-100.0 ms
Rate Chorus rate 0.05-10.00 Hz
Depth Chorus depth 0-127
Balance Chorus balance D100:0W-D0:100W
Flanger
Pre Delay Flanger pre delay time 0.0-100.0 ms
Rate Flanger rate 0.05-10.00 Hz
Depth Flanger depth 0-127
Feedback Flanger feedback level -98-+98%
Balance Flanger balance D100:0W-D0:100W
Output
Level Output level 0-127
38:CHORUS/DELAY(p. 64)
Refer to "35: CHORUS/DELAY."
39:FLANGER/DELAY(p. 64)
Refer to "36: FLANGER/DELAY."
40:CHORUS/FLANGER(p. 64)
Refer to "37: CHORUS/FLANGER."
41:STEREO PHASER(p. 65)
Parameter Value
Phaser
Type Phaser type 1, 2
Mode Mode 4-STAGE, 8-STAGE
Polarity Polarity INVERSE, SYNCHRO
Manual Manual 0 – 127
Rate Phaser rate 0.05 – 10.00 Hz , note
*2
Depth Phaser depth 0 – 127
Resonance Phaser resonance 0 – 127
X-Feedback Cross feedback level -98 – +98 %
Mix Level Mix level 0 – 127
Step Rate
Switch Switch OFF, ON
Rate Step rate 0.1–20.0 Hz , note *2
EQ Gain
Low Low gain -15 – +15 dB
High High gain -15 – +15 dB
Output
Level Output level 0 – 127
42:KEYSYNC FLANGER(p. 65)
Parameter Value
Flanger
PrDly Pre delay time 0.0 – 100 ms
Rate LFO rate 0.05 – 10.00 Hz , note
*2
Depth LFO depth 0 – 127
Fbk Feedback -98 – +98 %
Phase Phase 0 – 180 degree
Filter
Type Filter type OFF, LPF, HPF
Cutoff Cutoff frequency 200–8000 H(*1)
Step Rate
Switch Switch OFF, ON
Rate Step rate (*2) 0.1–20.0 Hz , note *2
Keysync
Switch Switch OFF, ON
Thres Keysync threshold 0 – 127
Phase Keysync phase 0 – 360 degree
EQ Gain
Low Low gain -15 – +15 dB
High High gain -15 – +15 dB
Balance
Balance D100:0W – D0:100W
Output
Level Output level 0 – 127
1: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000 Hz