Compactflash cards, Emc conformance, Suppression ferrites – Raymarine C140w User Manual

Page 11: Connections to other equipment, Declaration of conformity

Advertising
background image

Raymarine does not warrant that this product is error-free or that it
is compatible with products manufactured by any person or entity
other than Raymarine.

This product uses digital chart data, and electronic information from
the Global Positioning System (GPS) which may contain errors.
Raymarine does not warrant the accuracy of such information and
you are advised that errors in such information may cause the
product to malfunction. Raymarine is not responsible for damages
or injuries caused by your use or inability to use the product, by the
interaction of the product with products manufactured by others, or
by errors in chart data or information utilized by the product and
supplied by third parties.

CompactFlash cards

Navionics chart cards

The Display is pre-loaded with Navionics chart data. If you wish to
use different chart data, you can insert Navionics chart cards into
the CompactFlash card slot on the unit.

Use branded chart cards

When archiving data, Raymarine recommends the use of SanDisk
CF memory cards. Other brands of CF memory card may not work
in your unit.

EMC conformance

Basic EMC conformance statement.

Raymarine equipment and accessories conform to the appropriate
Electromagnetic Compatibility (EMC) regulations for use in the
recreational marine environment.

Correct installation is required to ensure that EMC performance is
not compromised.

Suppression ferrites

Do not remove ferrite

Raymarine cables may be fitted with suppression ferrites. These
are important for correct EMC performance. If a ferrite has to be
removed for any purpose (e.g. installation or maintenance), it must
be replaced in the original position before the product is used.

Use only ferrites of the correct type, supplied by Raymarine
authorized dealers.

Connections to other equipment

Requirement for ferrites on non-Raymarine cables

If your Raymarine equipment is to be connected to other equipment
using a cable not supplied by Raymarine, a suppression ferrite
MUST always be attached to the cable near the Raymarine unit.

Declaration of conformity

Raymarine Ltd. declares that the C-Series Multifunction Displays
are in compliance with the essential requirements of EMC directive
2004/108/EC.

Important Information

11

Advertising