Raymarine C140w - Manual (Page 97)

Symbol Description
Autopilot is in Standby mode.
Autopilot is in Track mode.
Autopilot is in Auto mode.
No autopilot detected.
Autopilot alarm active.
Dodge mode is active.
Fish Mode is active.
Autopilot calibration.
Power steering active.
Wind Vane mode is active.
Enabling the autopilot control function
1. Press the MENU button.
2. Using the trackpad, highlight the System Setup menu item, then
press the trackpad right to select it.
3. Using the trackpad, highlight the System Integration menu item,
then press the trackpad right to select it.
4. Using the trackpad, highlight the Autopilot Control menu item,
then press the trackpad right to select it.
5. Using the trackpad, select the Enabled option.
6. Press the OK button.
Engaging the autopilot
In the chart application:
1. Press the GOTO softkey.
2. Press the GOTO CURSOR, FOLLOW ROUTE OPTIONS, or
GOTO WAYPOINT OPTIONS softkey, as appropriate.
3. Press the ENGAGE PILOT softkey.
The Pilot Control dialog is displayed.
4. Press the appropriate softkey to enable the autopilot.
Disengaging the autopilot
In the chart application with the autopilot engaged:
1. Press the STOP GOTO or STOP FOLLOW softkeys:
The Pilot Control dialog is displayed.
2. Press the STANDBY softkey.
The autopilot is disengaged, and put in standby mode.
Using autopilot control 97