Raymarine C140w - Manual (Page 60)

2. To zoom out further from the picture, press the RANGE OUT
control.
3. Press and hold the button to zoom continuously.
Panning around the display
1. To pan around the display, press the trackpad in the direction in
which you want to pan.
2. Press and hold the trackpad in the relevant direction to pan
continuously.
Navigating to the cursor position on the chart
1. Position the cursor at the desired destination on the chart.
2. Press the GOTO softkey.
3. Press the GOTO CURSOR softkey.
Note: This target waypoint is also identified on the radar.
6.9 Chart presentation
The chart can be viewed in a number of ways to suit your needs.
You will normally view your chart with the vessel on screen and
motion mode ‘active’. When motion mode is active, as your vessel
moves, the chart is redrawn to keep the vessel on screen. When
you zoom the chart in active mode, the chart zooms about your
vessel position. Alternatively, you may be planning a journey and
do not want the chart to redraw as your vessel moves. You can
suspend the active motion mode by using the cursor to pan the chart
or by selecting FIND CURSOR. When motion mode is suspended,
the mode is shown in the status bar in parenthesis e.g. (RELATIVE
MOTION); zoom operates about your cursor position. Provided the
necessary data to ascertain your vessel’s position is available, you
can activate the motion mode, by selecting FIND SHIP.
Changing the chart display
Each chart window can be tailored to meet your particular needs.
You can:
• Set the chart view for individual windows or system wide.
• Change how the chart is orientated.
• Change the way your chart is drawn in relation to your boat
movement.
Working with multiple chart views
If you have more than one chart window, you can either share the
presentation or present each window independently. The option
you have chosen is indicated on the chart status bar as LOCAL or
SYSTEM.
60 C-Series Widescreen user reference