Raymarine C140w - Manual (Page 29)

Menu item Description Options
Date/Time Setup These options enable
you to customize the
date and time format
to your requirements.
You can also specify
a local time offset
from Universal Time
Constant (UTC), to
compensate for any time
zone difference. Date Format
• mm/dd/yy
• dd/mm/yy
Time Format
• 12hr
• 24hr
Local Time Offset
• –013.0 to +013.0
Units Setup Enables you to specify
the units used for
the following key
measurements:
• Distance
• Speed
• Depth
• Temperature
• Pressure
• Volume
Note: If the
Distance unit is
set to Nautical Miles
or Statute Miles, and
the data displayed
is less than 1 unit,
the system displays
Distance Units
• Nautical
Miles (default)
• Statute Miles
• Kilometers
Speed Units
• Knots (default)
• mph (miles per hour)
• kph (kilometers per
hour)
Depth Units
• Meters
• Feet (default)
• Fathoms
Menu item Description Options
the units in Feet. If
the Distance unit is
set to Kilometers, the
system displays the
units in Meters.
Temperature Units
• Fahrenheit (default)
• Celsius
Pressure Units
• Bar
• PSI (default)
• Kilopascals
Volume Units
• US Gallons
• Imp (Imperial)
Gallons (default)
• Liters
System Integration Determines the
connection settings
for external equipment.
The following items
are available in the
sub-menu:
• Autopilot Control
— If set to Enabled,
this option allows
you to control
certain aspects
of a connected
pilot control head,
such as sending
commands to engage
and disengage the
Autopilot Control
• Disabled (default)
• Enabled
DSC Message
• OFF (default)
• ON
SeaTalk Alarms
• ON (default)
• OFF
Data Master
Getting started 29