Raymarine C140w - Manual (Page 166)

Menu Item Description Options
Shallow Depth Alarm
Value If the Shallow Depth
Alarm is set to ON, an
alarm is triggered if the
depth drops below the
value you specify. 0002 ft to maximum
transducer range
Deep Depth Alarm Deep Depth Alarm
Switches the deep depth
alarm on or off. If a DSM
is not connected, this
cannot be set. OFF, ON
Deep Depth Alarm Value If the Deep Depth Alarm
is set to ON, an alarm
is triggered if the depth
exceeds the value that
you specify. 0002 ft to maximum
transducer range
12.9 Setting up your fishfinder
Opening the fishfinder setup menu
1. Make a fishfinder window active.
2. Press the MENU button.
3. Select Fishfinder Setup from the list of options.
Fishfinder setup menu options
This section describes the settings you can change using the
fishfinder setup menu. The setup menu contains settings that are
likely to be changed infrequently.
Menu Item Description Options
Configure Preset
Frequencies Enables you to adjust
the frequencies used
for the four fishfinder
presets. For each
preset, you can select
AUTO for fully automatic
selection, or you can
manually specify the
frequency. You can
also reset all the
preset frequencies to
the factory defaults if
required. AUTO or manual
frequencies.
Depth Digit Size Size of the digit that
indicates the depth. • Small
• Medium
• Large
166 C-Series Widescreen user reference