Raymarine C140w - Manual (Page 16)

3.1 Multifunction display system
integration
You can connect a number of external devices to your multifunction
display, providing additional features and functions.
The following diagram illustrates the various external devices that
can be connected to your multifunction display:
MENU CH OK
16/9 HI/LO
SCAN WATCH SQ
R AY240
WX
11.18.02
Weather receiver
External GPS
Personal
Computer
Fishfinder
DSM 30 & 300
SeaTalk hs
switch
Instruments
Autopilot
AIS receiver
DSC VHF
C-Series display
Additional
C-Series display
Video/Camera
D1
1 522_1
Digital Open Array radar scanner
Digital Radome scanner
or
Your multifunction display uses a number of protocols to transfer
data between the various devices in your networked system. The
following table details which devices may be connected to your
display, and the type of connectivity (in terms of protocols and
physical interfaces) that they use to exchange data with the display:
Device Type Suitable Devices Connectivity
Radar • ONE 4 kilowatt Digital
Radome Scanner,
OR
• ONE 4 kilowatt HD
Digital Open Array
Scanner, OR
• ONE 4 kilowatt SHD
Digital Open Array
Scanner, OR
• ONE 12 kilowatt SHD
Digital Open Array
Scanner
Note: HD and
SHD Open Array
Scanners must
be using software
version V2.23 or
later.
SeaTalk hs
Fishfinder • ONE DSM 30, OR
• ONE DSM 300
SeaTalk hs
Cartography — included Embedded (internal)
Navionics cartography Internal storage
16 C-Series Widescreen user reference