Raymarine C140w - Manual (Page 30)

Menu item Description Options
autopilot. If set to
Disabled, you will not
be able to control the
autopilot from your
multifunction display,
and all functions must
be controlled from
the pilot control head
itself.
• DSC Message — If
set to ON, details
of distress DSC
messages from a
connected DSC VHF
radio will be displayed
on your multifunction
display. If set to OFF,
the messages will
NOT be displayed
on your multifunction
display.
• SeaTalk Alarms — If
set to ON, all system
alarms generated
by any connected
SeaTalk units will be
displayed on your
multifunction display.
If set to OFF, the
alarms will NOT be
displayed on your
multifunction display.
• Data Alarms — If you
have more than one
• ON (default)
• OFF
Bridge NMEA Heading
• OFF (default)
• ON
SeaTalk2 Keyboard
• OFF (default)
• ALL
• ONE
NMEA Output Setup
• APB
• BWC
• BWR
• DBT
• DPT
• GGA
• GLL
• MTW
• MWV
• RMA
• RMB
• RMC
Menu item Description Options
multifunction display
on the same network,
one of them must
be set as the data
master. When this
option is set to ON,
the multifunction
display you are
currently using will
be set as the data
master.
• Bridge NMEA
Heading — If
set to ON, NMEA
heading data will
be bridged onto the
SeaTalk data bus,
and will be sent to
all NMEA-connected
devices. If set to OFF,
NMEA heading data
will NOT be bridged
onto the SeaTalk
bus. An example of a
use for this setting is
when using MARPA
with an external
fast heading sensor,
in which case you
should set this option
to OFF to ensure that
all NMEA-connected
units receive heading
data from the external
heading sensor.
• RSD
• RTE
• TTM
• VHW
• VLW
• WPL
• VTG
• ZDA
NMEA Port Setting
• NMEA 4800 (default)
• Navtex 4800
• Navtex 9600
• AIS 38400
30 C-Series Widescreen user reference