Raymarine C140w - Manual (Page 72)

3. If the object you have selected has more than one subject
area, use the rotary control to highlight and select the required
information.
Displaying pilot book information
In the chart application, when a port symbol is displayed:
1. Using the trackpad, move the cursor over the port symbol.
2. Press the OK button.
The Object Info dialog is displayed.
3. Using the trackpad, highlight the Pilot Book menu item, and
press the trackpad right to select it.
4. Using the trackpad, highlight the relevant book or chapter.
5. Press the VIEW PILOT BOOK softkey.
Displaying panoramic photos
In the chart application, when a camera symbol is displayed,
indicating the availability of a photo:
1. Using the trackpad, move the cursor over the camera symbol.
2. Press the OK button.
3. Press the VIEW PHOTO softkey.
6.10 Locating your vessel on the chart
display
Your current position is represented on screen by a boat symbol.
The boat symbol is shown below:
D6627-1
Boat symbol
If neither heading nor Course Over Ground (COG) data is available,
the vessel is shown as a solid circle. If positional data has been
selected for display, your position will be displayed in the data bar
under VES POS.
How to locate your vessel
In the chart application:
1. Press the FIND softkey and select the SHIP option.
Your vessel is displayed in the center of the chart.
2. To mark this position, press the WPTS MOB button twice, then
press the OK button.
72 C-Series Widescreen user reference