RCA Pro867 - Manual (Page 29)

Powering Your Camcorder
20
The adapter/charger’s power connector
attaches to the camcorder, and lets you
power your camcorder directly from
standard household power. The
adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually
anywhere in the world to power the
camcorder or recharge the battery. You
may need a plug adapter in some
countries. Consult your RCA dealer. Be
sure to purchase the plug adapter before
traveling. The adapter can be hard to find
in foreign countries.
To Attach the Adapter/Charger
1. Connect the power connector’s small
plug into the DC OUTPUT jack on the
adapter/charger.
2. Align the reference arrow on the
power connector with the arrow on the
camcorder.
3. Hold the power connector flush against
the back of the camcorder, and slide it
to the right in the direction of the
arrow as shown.
4. Plug the adapter/charger’s plug into
the nearest AC outlet (100-240V,
50/60Hz).
5. If the adapter/charger is properly
connected, its POWER indicator will
light.
Note: The battery level indicator may display
when using the adapter/charger to
power the camcorder. This indicator is used
for battery operation and has no meaning
when using other methods to power the
camcorder.
To Remove the Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Slide and hold the BATTERY eject
lever on the camcorder while sliding
the power connector to the left and off
the camcorder.
Using an optional plug adapter
An optional plug adapter may be required
in some countries.
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into an
AC outlet.
CHARGE
POWER
.
.
To AC
110-240V,
50/60 Hz
Power
Connector
Eject Lever
BATTERY
Jack
DC OUTPUT
Indicator
POWER
POWER SAVE
ON
BATTERY PAUSE STOP
REW PLAY F.FWD
Using the Adapter/Charger to Power Your Camcorder
AC Plug
Optional AC
Plug Adapter
AC 200-240V
To AC
100-240V,
50/60 Hz