RCA Pro867 - Manual (Page 42)

Date and Time Display
(continued)
33
6. Repeat steps 4 and 5 until you have
entered the correct month, day, year,
hour, minute, and AM or PM.
7. After you select AM or PM, press the
STOP button again to remove the
flashing cursor from the viewfinder
and start the camcorder’s internal
clock.
Correcting the Date or Time
To correct the date or time after the clock
has been started, simultaneously press the
DATE and STOP buttons for a few
seconds until the flashing cursor appears
in the viewfinder. Then correct the date
or time using the REW, F.FWD, and
STOP buttons.
RESET
DISPLAY
POWER
TITLE SEL
EDIT–ADV REW PLAY
F.FWD
STOP
PAUS E
OFF VCR
CAMERA
EJECT
+
—
W
T
BATTERY
FULL AUTO
SHUTTER
DATE
TITLER
FOCUS
OFF • • ON
DO NOT PUSH
REVIEW
FADE
STOP Button
F.FWD (Fast
Forward) Button
DATE Button
REW (Rewind) Button
POWER Switch
Press
Button
To Display in Viewfinder
and Record on Tape
One Time
Two Times
Three Times
Four Times
Date and Time
Date Only
Neither Date or Time
Returns to Date and Time
DATE
If you see the date and
time (or date) display in
the viewfinder while you
are recording, it will be
recorded on your tape.
If you do not want it
recorded, press the DATE
button until the displays
are removed from the
viewfinder.
Recording Date and Time (or Date) on Your Tape