RCA Pro867 - Manual (Page 69)

60
Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks
To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,
you will need the audio/video output cable that came packed with your camcorder. If
your TV is already connected to a VCR, you can attach the camcorder to the VCR and
watch what the camcorder is recording or playing on the TV.
AUDIO
IN
VIDEO
IN
Back of
Mono TV (or VCR)
White Audio Plug
Yellow Video Plug
Audio/Video
Output Cable
AUDIO
IN
VIDEO
IN
L
R
Yellow Video Plug
White Audio Plug
Y-Adapter
(available from electronics
supply store)
Audio/Video
Output Cable
or
Back of
Stereo TV (or VCR)
1
1
2
2 3
3
AV (Audio/Video)
IN/OUT Connector
(Located behind
small cover)
Installation
1 Attach the audio/video output cable’s
white plug to the AUDIO IN jack on
the TV (or VCR).
Note: If your TV (or VCR) has stereo
AUDIO jacks, attach the white AUDIO
plug to the one labeled MONO. If one is
not labeled MONO, you may need a
Y-adapter to hear both channels.
2 Attach the audio/video output cable’s
yellow plug to the VIDEO IN jack on
the TV (or VCR).
3 Attach the plug on the other end of the
audio/video output cable to the AV
IN/OUT connector of the camcorder.
Match the tabs on the plug with the
notches on the camcorder connector.
Do not force the plug.