RCA Pro867 - Manual (Page 34)

Powering Your Camcorder
(continued)
25
1. If the battery is attached to the
camcorder, remove it.
2. Align the reference arrow on the power
connector with the arrow on the
camcorder.
3. Hold the power connector flush against
the back of the camcorder and slide it
to the right in the direction of the arrow
as shown.
4. Insert the power connector’s small plug
into the DC OUTPUT jack on the DC
car cord adapter/charger.
5. Insert the plug on the DCC80 into the
vehicle’s cigarette lighter socket.
6. Slide the camcorder’s POWER switch
to the CAMERA position and place the
ON/POWERSAVE lever in the ON
position.
.
.
Power
Connector
Eject Lever
BATTERY
POWER SAVE
ON
BATTERY PAUSE STOP
REW PLAY F.FWD
POWER
CHARGE
Cigarette
Lighter Socket
Optional DCC80
Car Adapter/Charger
Jack
DC
OUTPUT
Using the RCA DCC80 DC Car Cord Adapter/Charger to Power
the Camcorder
Using the RCA DCC80 DC Car Cord Adapter/Charger to
Charge a Battery
1. If the power connector’s plug is
attached to the adapter/charger’s DC
OUTPUT jack, remove it. The
adapter/charger can not charge a
battery and power the camcorder at the
same time.
2. Attach the battery to the
adapter/charger as shown.
3. The CHARGE indicator will light while
the battery is being charged. When the
CHARGE indicator turns off, the
battery is charged.
POWER
CHARGE
Cigarette
Lighter Socket
Optional DCC80
Car Adapter/Charger
CHARGE Indicator Light