Renesas Emulation Pod M306N4T3-RPD-E - Manual (Page 39)

( 39 / 76 )
3.7 Connecting the PC4701
To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included
with this product package. Connect the PC4701 side connector of FLX120-RPD to the cable
connector of the PC4701, then secure the FLX120-RPD with screws.
(1) Connecting the Cable to the PC4701
Figure 3.10 shows how to connect the PC4701 and FLX120-RPD
Figure 3.10 Connecting the Cable to the PC4701
CAUTION
Note on Connecting the Cable:
• Always shut OFF power before connecting the cable. Otherwise, the internal circuits
may be damaged.
• To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side
connector horizontally with the "UPSIDE" facing up.
IMPORTANT
Note on Securing the Screws:
• After connecting the cable to the emulator main unit PC4701, be sure to secure the
screws mounted in both sides of the connector.