Renesas Emulation Pod M306N4T3-RPD-E - Manual (Page 54)

( 54 / 76 )
Chapter 5. Specifications
5.1 Specifications
Table 5.1 lists the specifications of the M306N4T3-RPD-E.
Table 5.1 Specifications of the M306N4T3-RPD-E
Main clock oscillation frequency Main clock oscillation frequency
Voltage (Main clock: no dividing)
This product
Voltage (Main clock: no dividing)
Actual MCU
f(X
IN
) operating max. frequency (MHz)
f(X
IN
) operating max. frequency (MHz)
PC4701 (excluding PC4701L and PC4700L)
M16C/6N Group M16C/6N4, 6N5
M306N4FGTKP (dedicated package), M30627MHP-xxxGP (one each)
Single-chip mode, Memory expansion mode, Microprocessor mode
1 MB Internal ROM, RAM area: 0 wait, 16 MHz (max.)
External area: 0 wait, 8 MHz (max.)
1 wait, 16 MHz (max.)
16 MHz (no-dividing) at 4.2 to 5.0 V (see the figures below)
X
IN
-X
OUT
Internal oscillator circuit board (OSC-3)
Switchable to external oscillator input
X CIN -X COUT Internal oscillator circuit board (fixed 32.768 kHz)
Switchable to external oscillator input
4.2 to 5.5 V
5 to 35 ° C (no dew)
-10 to 60 ° C (no dew)
Supplied from PC4701
100-pin 0.65-mm-pitch LCC socket:
(1) M30800T-PTC (included)
+ IC61-1004-051 (included)
100-pin 0.65-mm-pitch QFP (100P6S-A):
(1) M30800T-PTC (included)
+ M3T-100LCC-DMS (not included)
+ M3T-DIRECT100S (not included)
(2) M30800T-PTC (included)
+ M3T-100LCC-DMS (not included)
+ M3T-DUMMY100S (not included)
(3) M30800T-PTC (included)
+ M3T-100LCC-DMS (not included)
+ M3T-FLX-100NRB (not included)
Emulators
Applicable MCU
Evaluation MCU
Usable mode
Emulation memory
Maximum operating frequency
Clock supply
Operating voltage
Operating temperature
Storage temperature
Power supply to emulation pod
Connection to target system
Refer to "3.8 Connecting the Target
System" (page 41).