Renesas Emulation Pod M306N4T3-RPD-E - Manual (Page 63)

( 63 / 76 )
Figure 5.6 External dimensions of the converter board M30800T-PTC and a sample foot pattern
Unit: mm
(2) External Dimensions of the Converter Board M30800T-PTC
Figure 5.6 shows external dimensions of the converter board M30800T-PTC (included) for a 100-
pin LCC and a sample foot pattern for 100-pin 0.65-mm-pitch (100P6S-A).
When connected to a 100-pin LCC socket
*1. To use the AXS4003M295C
(Matsushita Electric Works, Ltd.)
or the IC61-1004-051 (Yamaichi
Electronics Co., Ltd.), be sure to
set up foot patterns for the
holders.
*2. To use the AXS4003M295C
(Matsushita Electric Works, Ltd.),
as the contacts of the IC socket
body touch the PC board in the
shaded area, thus be sure to
give special consideration to the
patterns of traces so that no other
pins touch the PC board.
(Through-hole mounting is not
permitted.)
*2
*1
Unit: mm