Roland RS-70 - Manual (Page 144)

144
Performing with a computer
Windows 2000 users
1.
With the RS-70 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
2.
Log on to Windows as a user with administrative privileges (such as
Administrator).
3.
Click the Windows Start button, and from the menu that appears, select Settings |
Control Panel . In Control Panel , double-click the System icon.
The System Properties dialog box will appear.
fig.Win-13.e
4.
Click the Hardware tab, and then click
[Driver Signing] .
The Driver Signing Options dialog box
will appear.
fig.Win-14.e
5.
Make sure that “File signature
verification” is set to “Ignore.”
If it is set to “Ignore , ” simply click [OK] .
If it is not set to “Ignore , ” make a note of the
current setting ( “Warn” or “Block” ). Then
change the setting to “Ignore” and click
[OK] .
6.
Click [OK] to close the System Properties
dialog box.
7.
Exit all currently running software
(applications).
Also close any open windows. If you are using virus checking or similar software, be
sure to exit it as well.
8.
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
9.
Click the Windows Start button. From the menu that appears, select “Run...”
The “Run...” dialog box will appear.
If you changed the “File
signature verification”
setting in step 5, restore
the original setting after
Windows restarts (p. 146).
RS-70_e3.book 144 ページ ２００３年６月１８日 水曜日 午後１２時５４分