Roland RS-70 - Manual (Page 41)

41
Using the sequencer to create a pattern
Quick Start
2. Set the tempo
fig.q06-22
When you have selected a rhythm pattern, you can specify the tempo.
1. Press [TAP TEMPO] so it is lit.
The current tempo of the pattern will be displayed.
fig.q06-02_40
2. Use VALUE [-] to adjust the tempo to “90.”
fig.q06-02_40
You can change the BPM before or after the recording.
Here, we've set the tempo slower than that of the original so the keyboard can be
played slowly, but if you find it difficult to play at this tempo, you can change it to
any value you like.
3. Press [EXIT] to return to the previous screen.
3. Record the bass part
Next, record (overdub) the bass part while you listen to the rhythm.
fig.q06-23
1. Press [PART SELECT] so it is lit.
2. Press [9].
The button will light, and the part 9 is selected.
3. Use VALUE [-]/[+] to select your favorite patch.
1 2 3
You can also set the tempo
by tapping [TAP TEMPO]
(p. 67).
BPM stands for Beats Per
Minute, and indicates the
number of quarter notes
that occur in one minute.
3 1 2
Selecting a part (p. 54)
RS-70_e3.book 41 ページ ２００３年６月１８日 水曜日 午後１２時５４分