Roland RS-70 - Manual (Page 154)

154
Performing with a computer
fig.Mac-08.e
7.
After the search has been completed,
make sure that
“Roland RS-70” is listed
in the “OMS Driver Setup” dialog box,
and click [OK] .
fig.Mac-09.e
8.
After making sure that the RS-70 is listed
in the
“OMS MIDI Device Setup” dialog
box, click the check box for RS-70, and
click
[OK] .
fig.Mac-10.e
9.
Change the name of the keyboard icon to
“Port 1” or any other names except
“Roland RS-70.”
fig.Mac-11.e
10.
The “Save” dialog box appears.
Input the desired file name, and click
[Save] .
fig.Mac-12.e
11.
Select [Test Studio] in the [Studio] menu and check it in
order to verify whether sound is produced.
12.
In the “My Studio Setup” window, click the keyboard
icon.
When you move the mouse pointer near the keyboard
icon, the pointer will change to the shape of an eighth
note. Verify that you can hear sound from your RS-70.
13.
After you have finished the above check, quit OMS Setup.
This completes driver settings.
The following step will
cause a relatively loud
sound to be produced by
the RS-70, so turn down the
volume of your RS-70
before continuing.
This completes connections for the RS-70 and Macintosh, and installation of the
MIDI driver. Now, MIDI data can be input and output (recorded and played).
RS-70_e3.book 154 ページ ２００３年６月１８日 水曜日 午後１２時５４分