Runco SIGNATURE CINEMA SC-50D - Manual (Page 25)

Controls and Functions
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 9
PRE
L
IMINAR
Y
7. RIGHT BUTTON
Used to direct-select inputs or move the OSD menu cursor to the right. When no
menus are present on-screen, the RIGHT button toggles through the different
sources, in this order:
Composite 1 - Composite 2 - Composite 3 - Component - HD 1 - HD 2 - SCART -
HDMI 1 - HDMI 2 - HDMI 3 - HDMI 4
8. MENU BUTTON
Press the MENU button to bring up the main menu, or to exit the current menu and
return to the previous one.
9. UP BUTTON
Use to direct-select aspect ratios or move the OSD menu cursor up. When no menus
are present on-screen, the UP button toggles through aspect ratios in the following
order:
Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9
10. ENTER BUTTON
When an item is highlighted on the OSD, the ENTER button selects the item.
11. STANDBY LED
Lights amber when the DHD Controller is in standby mode; otherwise it is off.
2.4
DHD Controller Rear
Panel Figure 2-4 shows the rear connector panel on the DHD Controller.
Figure 2-4. DHD Controller Rear Panel
1. MAIN POWER SWITCH
Disconnects or applies power to the DHD Controller.
2. TRIGGERS
Connection for up to three (3), 12-volt trigger-controlled devices such as retractable
screens or screen masks. Output current is limited to 250 milliamperes (mA).
3. USB
A standard, USB Series “B” connection to a personal computer, for performing
software upgrades and other service procedures.
USB
To Accessory Box
Video 1 Video 2
Video 3 Pr Pb PC / Control
RS-232
IR
Display Control
HDMI 1 HDMI 3
HDMI 2 HDMI 4 Ethernet
HDMI Out
To Display
HDMI Out
Audio Only
Component / SCART
Y
G Pb
B
Pr
R
Pr
R
Pb
B
Y
G
TRIGGERS RS-232
1 2 3
H V
H V Pr Pb
Componen p
Y
G Pb
B
Pr
R
Pr Pb Y
H V
H V
Y Pb Pr
R B G
H V
15 12 8 7
6 2 5 4 3
HDMI 2 HDMI 4 HDMI 2 HDMI 4
11 9 14 13 10
Video 1 Video 2
Video 3
nt / SCART en
1