Runco SIGNATURE CINEMA SC-50D - Manual (Page 46)

Installation
30 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
PRE
L
IMINAR
Y
RS-232 Connection: Connect the Display Control output from the DHD Controller to
the RS-232 input on the SC-50d/SC-60d. Use a standard, modular telephone cable with
RJ11 plugs at both ends. On the SC-50d/SC-60d end, use the provided RJ11-to-DB9
adapter. This adapter is wired as shown in Figure 3-10.
Figure 3-10. RS-232 Connection from the DHD Controller to the SC-50d/SC-60d
PWR
A
RS232 IN
3
4
XMT DATA
2
3
RCV DATA
2 5
SIG GND
NO CONNECTION 1, 6
1, 4, 6,
7, 8, 9
To/From
DHD
Controller
To/From Projector
6-position
RJ11 Male
DB9 Male
6
1
1
6