Runco SIGNATURE CINEMA SC-50D - Manual (Page 43)

Installation
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 27
PRE
L
IMINAR
Y
3.6
Mounting the
SC-50d/SC-60d There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another.
Floor Mounting (Upright) In typical front and rear screen installations, the projector can be mounted to a secure and
level surface such as a table or cart. Carts are useful when moving a projector during a
presentation or from site to site. If possible, lock the wheels when it’s in position to prevent
it from being moved during a presentation.
Ceiling Mounting
(Inverted) For fixed installations, and for those that want the projector out of sight or have a limited
space for projector and audience, you can invert the SC-50d/SC-60d and suspend it from
the ceiling using a specially-designed ceiling mount fixture.
Install the ceiling mount kit according to the instructions provided with the kit.
Installing the Projector in
an Enclosure The projector can also be inverted and placed in an enclosure above and behind the
viewing area. Install four feet on the inside bottom surface of the enclosure on which the
projector can rest. A variety of materials can be used for this purpose (for example, rubber
crutch tips or turntable feet).
Use only the Runco-approved ceiling mount kit designed for your
projector.
Note