Installation, 1 remote control, Notes on batteries – Runco SIGNATURE CINEMA SC-50D User Manual
Page 31: Remote control, Pre l iminar y
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
15
PRE
L
IMINAR
Y
3.1
Remote Control
To install batteries in the remote control:
1.
Press down the tab on the cover and
pull the cover in the direction of the
arrow.
2.
Insert the included batteries. Ensure
that the polarities correctly match the
and
markings inside the battery
compartment.
3.
Insert the lower tab of the cover into
the opening, and press down the cover
until it clicks in place.
Notes on Batteries
• Make sure that the battery polarities are correct when installing the batteries.
• Do not mix an old battery with a new one or different types of batteries.
• If you will not use the remote control for a long time, remove the batteries to avoid
damage from battery leakage.
• Do not expose batteries to excessive heat such as from sunshine, fire or the like.
3. Installation
Installation must be performed by a qualified custom video
installation specialist.
Note