Ricoh 2400L - Manual (Page 227)

On/off switches available in this menu are
Feature Feature
1 Telephone Line Type 5 Daylight Saving Time/Summer Time
2 Authorized Reception 6 Memory Lock
1
3 Night Timer 7 Forwarding
1
4 RDS 8 Multicopy Reception
1
(
1
: Optional Feature Expander required.)
User Parameter Settings
A wide range of features can be switched on or off by using the User Parameters.
However, this feature is more difficult to use than the On/Off Switches. The
switches and adjustments are presented on the screen as rows of digits. Each
digit can be either 0 or 1. Each feature is allocated one or more digit. The value of
the digit determines the status of the feature.
The overall procedure is explained below. However, each of the adjustments that
can be made using this procedure are explained in the relevant parts of the
manual.
1. Function 6 2 2 2 2 6 3 and Yes. SETTING? Y/j
PRINT LIST j
F
At this time, you can print a User
Parameter List if you press
j and Start.
.
2. Yes. KPAD/Y/j k
SWITCH 00 : 0000 0000
The current settings for switch 00 are now displayed on the bottom line of the
display. If the settings for this switch are the way that you want them, go to
step 4.
3. To change the required setting, press a
number from 0 to 7 corresponding to the
digit that you wish to change.
Example: 0 from the ten key. The value
of the digit changes, in this case from 0
to 1.
KPAD/Y/j k
SWITCH 00 : 0000 0001
Each switch contains 8 digits, which act as on/off switches for various
features. The digits are numbered from 7 to 0; the setting of digit 7 is shown
at the left side of the display and digit 0 is at the right.
HOW TO USE THIS MANUAL
10