Ricoh 2400L - Manual (Page 406)

1. Prepare a soft damp cloth.
2. Turn off the main power switch.
3. Lift up the operation panel.
4. Clean the separation roller [A] with the
soft damp cloth, while rotating the
roller.
5. Clean the white strip [B] with the soft
damp cloth.
CAUTION:
Do not damage the sensor actuator
[G] (black plastic) on the white stripe.
6. Clean the R1 and R2 rollers [D] with
the soft damp cloth. To rotate the rollers,
gently hold the cloth down on the rollers
and turn the main power switch on. The
rollers will rotate once.
USER MAINTENANCE PROCEDURES LOOKING AFTER THE MACHINE
190