Ricoh 2400L - Manual (Page 344)

Printing from Memory Lock (Feature Expander Required)
If the Receive File indicator is blinking, a message has been stored using
Memory Lock. Print it using the following procedure.
1. Function 5 5 and Yes.
LOCK ID KPAD
llll
2. Input the Memory Lock ID.
Example: 4 6 3 3 from the ten key pad.
LOCK ID START/N
4633
3. Start.
NOTE: If the Receive File indicator is blinking, an incoming fax message has
been stored in the memory using the Memory Lock feature or
Confidential Reception feature.
To print the message using the Confidential Reception, see page 122.
List of Special Termi-
nals
(Function 81)
Memory Lock on/off
(Function 62)
Lock messages from
special terminals, or
Print messages from
special terminals
(Function 63)
Result
Empty On Either All messages are
locked in memory.
Empty/Not empty Off Either No messages are
locked in memory.
Not empty On Listed Only messages from
special terminals are
locked in memory.
Not empty On non-listed All messages are
locked in memory
except those from
special terminals.
RECEPTION ADVANCED FEATURES
128