Ricoh 2400L - Manual (Page 784)

❐ Select whether or not your machine transmits a forwarding mark to be printed
at the other end on the top of each page of the printout.
If the RTI/CSI of the machine sending you a fax is not the same as any of those
that you have programmed into this feature, the message will not be forwarded.
Cross-references: RTI and CSI: see page 205.
Journal: see page 137. Wild Cards: see page 102.
Programming the Forwarding Feature
This section shows you how to set up your machine to forward incoming fax
messages to another location or locations.
1. Function 6 2 2 2 2 8 2 and Yes.
To print a list, press


  

     


2. Yes.    

3. Store a forwarding station number.
Example: 2 1 2 5 5 5 1 2 3 4
If your machine is behind a PBX, add
the access code before the number, un-
less this forwarding station is an exten-
sion connected to the same PBX as
your machine. And press Yes.
   
4. Either:
❐ If you wish all incoming messages
to be forwarded to this station: No.
Do not store any RTIs/CSIs for it.
❐ If you only wish messages from cer-
tain senders to be forwarded to this
station:Input their RTIs or CSIs (mes-
sages from senders other than
these will not be forwarded to this
station): Yes and go to step 5.  
 !


  
  
 
AD
V
A
NCED
FEA
T
URES
ADVANCED FEATURES RECEPTION
93