Ricoh 2400L User Manual
Page 678
Basic Transmission Procedure
Memory Transmission
Immediate Tranmission
1
Make sure that the machine is in standby mode.
2
Check that the Memory indicator is lit.
If it is not lit, press MEMORY
Check that the Memory indicator is not
Lit.
If it is lit, press MEMORY
3
Carefully place the document in the feeder.
4
Select the contrast and resolution (and halftone if neccessary)
5
You may select one or more of the
following options. To select an option,
press the right arrow on the scroll key,
t h e n p r e s s o n e o f th e fo l lo w in g
combinations of keys.
Personal Code
Send Later
TRD *
Page Count
TTI On/ Off
6
Enter the telephone number in one of the following ways:
Quick Dial
Speed Dial
Group Dial
Ten Keypad
Handset
On Hook Dial
Quick Dial
Speed Dial
Ten Keypad
Handset
On Hook Dial
7
Press YES
Press START
8
Either:Dial another number, go to step 6.
then press Start. To dial another number,
go to step 6. Otherwise, press Start.
9
The machine stores your message in
memory, then sends it to each terminal in
sequence.
The machine dials, then your message is
fed, scanned, and sent to the other
terminal.
*: Feature Expander Required