Ricoh 2400L - Manual (Page 469)

2. Display Displays prompts, warnings, and selected modes.
Stamp Key Press this to enable or disable the stamp feature.
Function Key Press to use one of the numbered functions explained in this
manual.
Yes/No Keys Use to answer questions on the display.
Scroll Key When an arrow is shown on the display, use these keys to
access the options, items, or functions shown by the arrow. Also
use them to move the cursor when programming or editing a
displayed item.
Memory Key If the indicator above it is lit, your document will be stored before
transmission. If it is not lit, your document will be sent
immediately without being stored. Press this key to change the
mode.
3. Quick Dial Keys Each of these can be programmed with a telephone number, a
group, or a keystroke program. You can also use these keys to
enter names and labels such as the RTI and TTI.
4. Speed Dial/Tel
Directory Key Press this to dial using the Speed Dial feature, or the Telephone
Directory feature.
Pause/AI Redial Key Press this key to insert a pause when dialing or programming a
number. Also use it to redial a previously dialled number (the
machine remembers the last 10).
On Hook Dial Key Press this to dial without picking up the handset.
Clear Key Use this as a backspace key during programming.
Ten Keypad Use this as a telephone keypad to access user functions, or to
enter Speed Dial codes.
Energy Saver Key Hold this down for a few seconds to start or end the energy
saver mode.
Copy Key Press this to copy the document now in the feeder.
Stop Key Press this to stop the machine and return it to standby mode.
Start Key Press this to start fax communication.
GUIDE T
O
COMP
ONENTS
GUIDE TO COMPONENTS OPERATION PANEL
13