Ricoh 2400L - Manual (Page 276)

Sending to Just One Location
1. Make sure that the machine is in standby
mode:
The display on the operation panel must
be as shown on the right.
READY 100% 10:00AM
SET DOC. OR DIAL NO.
2. Carefully place your fax message face
down into the auto document feeder.
Note: You can dial without placing the
message in the feeder first. Place the
document after you dial the number and
go to step 4.
TRANSMIT OPTIONk
DIAL FAX NUMBER
p
The pages must be placed face down in the
feeder, with the first page at the bottom of the
stack.
p
Feed the pages in so that the top edge goes in
first.
p
Do not feed in more than 30 pages.
p Do not use unsuitable types of original (see
pages 56 and 57).
p Adjust the document guides to fit the width of
the pages.
p Do not use pages of different sizes.
p
The pages should be arranged loosely,
but the leading edges should be tidy, as
shown above.
Selecting Contrast and Resolution: See page 66.
Options for Sending a Message: See page 71.
SENDING A FAX MESSAGE ROUTINE OPERATION
60