Ricoh 2400L User Manual
Page 590
4. Pull out the transparent sheet from the
side of the new cassette, as shown.
Then, remove the black sheet from the
front of the cassette.
5. Slide the toner cassette into the
machine as far as it will go. Gently
push down the cassette to secure
it in place.
CAUTION:
Hold the cassette as shown in the
illustration.
Never touch the photoconductor in-
side the machine (Green drum).
6. Remove the old cleaning pad.
7. Install the new cleaning pad.
Match the position of the arrow on the
cleaning pad with the arrow on the in-
side of the machine.
NOTE: Push the cleaning pad until you
hear it clicking.
Important: Do not forget to install the clean-
ing pad. If not fitted correctly, damage may
caused to the machine.
8. Close the upper cover and lower the op-
eration panel until it clicks.
NOTE: If the upper cover does not
close, the toner cassette or
cleaning pad is not correctly
installed.
REPLACING TONER CASSETTE AND CLEANING PAD
LOOKING AFTER THE MACHINE
134