Ricoh 2400L - Manual (Page 878)

Switch 03 - Automatic printing of reports
Digit Purpose
0
Communication result report (Memory Transmission)
0: Off 1: On*
1 Do not change this setting.
2 File reserve report 0: Off* 1: On
3 File reserve report (polling reception) 0: Off* 1: On
4 Communication result report (polling reception) 0: Off 1: On*
5
Transmission result report (immediate transmission)
0: Off 1: On*
6 Polling clear report 0: Off 1: On*
7 Journal 0: Off 1: On*
Switch 04 - Automatic printing of reports, Various
Digit Purpose
0 Confidential reception report 0: Off 1: On*
1 to 6 Do not change these settings
7
Inclusion of part of the image on the following reports: Communication Result
Report, File reserve Report, Polling Clear Report, Communication Failure Report,
Transfer Result Report, Polling Confirmation List
0: Off 1: On*
Switch 05 - Various
Digit Purpose
0 Substitute reception 0: Off 1: On*
1 Memory reception if no RTI or CSI received 0: Possible* 1: Not possible
2, 3 Do not change these settings
4, 5
Restricted Access Digit 5 Digit 4 Setting Digit 5 Digit 4 Setting
0 0 Off* 0 1 On
1 X Do not use these settings.
6
Energy Saver mode
0 Heater off
1 Heater energy saver mode*
7 Do not change this setting.
Switch 06 Home position
Digit Purpose
0 Printing TTI 0: Off 1:On*
1 Do not change this setting
2 Closed network in transmission 0: Disabled* 1: Enabled
3 Do not change this setting.
4 Batch Transmission 0: Off 1: On*
5 to 7 Do not change these settings.
TECHNI
CAL
REFERENCE
TECHNICAL REFERENCE ON/OFF SWITCHES AND USER PARAMETERS
187