Switch 03 - automatic printing of reports, Switch 04 - automatic printing of reports, various, Switch 05 - various – Ricoh 2400L User Manual
Page 627: Switch 06 home position
Switch 03 - Automatic printing of reports
Digit
Purpose
0
Communication result report (Memory Transmission)
0: Off
1: On*
1
Do not change this setting.
2
File reserve report
0: Off*
1: On
3
File reserve report(polling reception)
0: Off*
1: On
4
Communication result report(polling reception) 0: Off
1: On*
5
Transmission result report (Immediate Transmission)
0: Off
1: On*
6
Polling clear report
0: Off
1: On*
7
TCR
0: Off
1: On*
Switch 04 - Automatic printing of reports, various
Digit
Purpose
0
Confidential reception report
0: Off
1: On*
1 to 6
Do not change these settings.
7
Inclusion of part of the image on the following reports: Communication Result
Report, File Reserve Report, Polling Clear Report, Communication Failure Report,
Transfer Result Report, Polling Confirmation List
0: No
1: Yes*
Switch 05 - Various
Digit
Purpose
0
Substitute reception
0: Off
1: On*
1
Memory reception if no RTI or CSI received.
0: Possible
1: Not possible*
2, 3
Do not change these settings.
4
Restricted Access
Digit 4 Setting Digit 4 Setting
0 Off*
1 On
5
Do not change this settings.
6
Energy Saver mode
Digit 6 Setting
0 Heater off
1 Heater energy saver mode*
7
Do not change this setting.
Switch 06 Home position
Digit
Purpose
0
Printing TTI
0: Off
1:On*
1
Do not change this setting.
2
Closed network transmission.
0: Disabled*
1: Enabled
3
Do not change these settings.
4
Batch Transmission (Feature Expander required) 0: Off
1: On*
5 to 7
Do not change these settings.
TECHNICAL
RE
FERE
NCE
TECHNICAL REFERENCE
ON/OFF SWITCHES AND USER PARAMETERS
171