Roland CD-2e - Manual (Page 25)

Preparing an SD Memory Card (continued)
25
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
fig.SDlock.eps SD memory cards have a protect switch.
If the protect switch is in the “LOCK” position, you won’t
be able to write to the card, and the songs on the card will
be protected.
If a protected SD memory card is inserted in the CD-2e,
you won’t be able to record on that card. Nor will you be
able to edit or delete songs, or format the card.
About the protect switch
Protect switch
In some cases when you insert an unused SD memory card that you purchased at a
consumer electronic retailer, or an SD memory card that has been used with a computer
or digital camera, the screen may indicate “Unknown Format. Format?”
In order to use this SD memory card with the CD-2e, you’ll need to format the card.
Proceed as follows to format the card.
1
To begin formatting, press the [ENTER] button.
fig.SDcard05.eps
2
If you’re sure you want to proceed, press the [ENTER] button.
(If you decide to cancel, press the [EXIT] button.)
fig.SDcard06.eps
The screen will indicate “Processing...”, and the card will be formatted. When
formatting is completed, you’re returned to the audio source screen.
If the screen indicates “Unknown Format”
● While formatting is in progress, you must never turn off the power or remove the SD
memory card.
● When you format an SD memory card, any data that was on that card will be erased. Data
that’s been lost in this way cannot be recovered. Please make sure that you really want to
format the card.
Note
CD-2e_e.book 25 ページ ２００７年１０月２４日 水曜日 午前１１時１６分