Roland CD-2e - Manual (Page 62)

62
Convenient Functions for Playback
This adjusts the key (pitch) of the playback sound in semitone steps. This can be useful
in situations like the following.
● You want to practice flute along with an accompaniment CD that was created for alto
sax.
● You want to sing along with a karaoke CD at a key that’s easier for you to sing.
1
Press the [MENU] button to access the menu screen, and choose “Key.”
fig.menu-key01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Key.”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to adjust the value, changing the key.
If you press the [ ] button, the value will return to “0.”
fig.menu-key02-e.eps
* If you change the key setting during playback, the audio will be interrupted momentarily.
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
fig.icon-key-e.eps
The “ ” symbol will disappear if you set the “Key” to “0” in Step 2.
When you turn off the power, the Key setting will return to “0.”
Changing the Key of the Playback
Value Explanation
-6–0 (factory setting)–+5 Decreasing the value by one will lower the overall pitch of the
song by a semitone. Increasing the value by one will raise the
overall pitch of the song by a semitone. A setting of “0” is the
original key of the song.
The Key icon
The “ ” icon is displayed
if you’ve changed the key setting.
CD-2e_e.book 62 ページ ２００７年１０月２４日 水曜日 午前１１時１６分