Roland CD-2e - Manual (Page 68)

68
Convenient Functions for Playback (continued)
This function adds reverberation (reverb) to the audio played back from an SD memory
card or CD, creating the impression that the performance is occurring in a concert hall
or other real-world acoustic environment.
1
Use the [REVERB] button to select the depth of reverb.
Pressing the [REVERB] button cycles through the following settings.
Play back from the SD memory card or CD, and check the reverb depth.
fig.reverb-e.eps
2
Press the [EXIT] button.
You’re returned to the audio source screen.
* If you don’t press the [REVERB] button for five seconds, you’ll automatically be returned to the
audio source display.
Adding Reverberation (Reverb)
No reverb
Reverb depth:
minimum
Reverb depth:
normal
Reverb depth:
maximum
● The [REVERB] button will light if reverb is being added.
● Reverb is not added to sound from an external input source such as the built-in mic or an
external mic.
Important
CD-2e_e.book 68 ページ ２００７年１０月２４日 水曜日 午前１１時１６分