Roland CD-2e User Manual
Page 45
Recording a Cassette or MD
(continued)
45
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
6
Press the [
(Record)] button to enter recording-standby mode.
fig.rec-intmic04-e.eps
7
Press the [
(Play)] button to begin recording.
Start your performance.
8
Play back your audio device (e.g., cassette deck).
The song being played will be recorded.
9
Press the [
(Stop)] button to stop recording.
fig.rec-intmic06-e.eps
The recorded song will be added to the end of the SD memory card or CD-R/RW disc.
If you want to listen to the song you recorded, press the [
(Play)] button
immediately after you stop recording.
Blinking
Remote control
Remote control
●
Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that’s being recorded, you’ll need to use
headphones. (Refer to Step 4 on Page 36.)
●
When turning the [LINE] knob, you may hear a faint noise when the input level changes,
but this is not a malfunction.
●
If you’ve finished recording a CD-R/RW disc and would like to play that disc on another
CD player, you’ll need to execute the “Finalize” operation. You can finalize the CD-R/RW
disc when ejecting it. For details, refer to “Making a CD-R/RW Disc for Playback on
Another CD Player (Finalize)” (Page 83).
Important
CD-2e_e.book 45 ページ ２００７年１０月２４日 水曜日 午前１１時１６分