Roland CD-2e - Manual (Page 77)

Erasing Tracks from a CD-RW Disc (continued)
77
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
Here’s how to erase all tracks from the CD-RW disc.
* In order to perform this operation, you’ll need the included, dedicated AC adaptor.
1
Insert the CD-RW disc that you want to edit.
2
Press the [MENU] button to access the menu screen, and choose “CD
Erase All?”
fig.menu-RWeraseall-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “CD Erase All?”
Press the [ENTER] button to confirm your choice.
3
If you’re sure you want to proceed, press the [ENTER] button.
fig.RWeraseall-mssg01-e.eps
4
If you’re still sure you want to proceed, press the [ENTER] button.
(If you decide to cancel, press the [EXIT] button.)
fig.RWeraseall-mssg02-e.eps
The display will show “Processing,” and all songs will be deleted. During this process, a
timer is displayed, counting down the time until the operation is completed.
When the deletion is completed, you’re returned to the audio source screen.
Erasing All Tracks
Count-down (min:sec)
Once you delete a song, you cannot recover the recorded content. Use this operation with care.
Note
● You can’t erase tracks from a CD-R disc.
● If the CD-R/RW disc has been finalized (Page 83), finalization will automatically be
removed when you erase all tracks.
Important
CD-2e_e.book 77 ページ ２００７年１０月２４日 水曜日 午前１１時１６分