Roland CD-2e - Manual (Page 36)

36
Recording Acoustic Instruments or Vocals
ig.intmic-e.eps
The internal mics are stereo mics. Sound picked up
by the mic on the left side of the CD-2e is recorded
on the left channel (L), while sound from the mic on
the right side is recorded on the right channel (R).
4
If you want to listen to the recorded audio while you record, connect
headphones to the PHONES jack located on the side of the CD-2e.
The sound received by the internal mics will not be heard from the internal speakers.
You’ll need to use headphones if you want to monitor the sound being recorded.
* Use the [VOLUME] knob to adjust the headphone volume.
fig.connect-headphone-e.eps
5
On the CD-2e’s side panel, set the [MIC SELECT] switch to the “INT”
(internal mic) position.
fig.rec-intmic01.eps
Recording with the Internal Mics
If you’re recording to an SD
memory card If you’re recording to a
CD-R/RW disc
1
Turn on the power. (
☞
Page 21, 22)
1
Turn on the power. (
☞
Page 21)
2
Insert the SD memory card.
(
☞
Page 24)
2
Insert the CD. (
☞
Page 27)
3
Set the audio source to “SD.”
Press the [SD CARD] button so it’s lit.
fig.selectCD-e.eps
3
Set the audio source to “CD.”
Press the [CD] button so it’s lit.
fig.selectSD-e.eps
Internal mic
(left channel)
Internal mic
(right channel)
Stereo mini type
Type of plug that can
be connected
CD-2e_e.book 36 ページ ２００７年１０月２４日 水曜日 午前１１時１６分