Roland CD-2e - Manual (Page 61)

61
Listening to a CD/ Listening to an SD Memory Card (continued)
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations fig.tansport-remote-e.eps
Remote operations
Song stop/play (pause)
Song cue, rewind/fast-forward
Adjusting the volume
Higher volume.
Lower volume. The [VOLUME] knob of the CD-2e itself does not
move when you use the remote control to adjust
the volume. This will mean that the position of the
[VOLUME] knob may not match the actual volume.
Note
If you press the [ (Stop)] button during playback, the CD-2e can remember the
position at which you paused, and will resume playback from that location the next time
you start playback. This is called the Resume function.
1
Press the [MENU] button to access the menu screen, and choose
“Resume.”
fig.menu-resume01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Resume.”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to turn the Resume function on/off.
fig.menu-resume02-e.eps
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
After pressing the [ (Stop)] button to halt playback, you can press the [ (Play)]
button to re-start playback from the location at which you stopped.
If after pressing the [ (Stop)] button to stop playback, you then press the [ (Stop)]
button or eject the SD memory card or CD, the Resume function, which had
remembered the location at which you stopped, will be cancelled.
Continuing Playback from When You Stopped a Song (Resume Function)
Value Explanation
Off (factory setting) The Resume function will be off.
On The Resume function will be on. The CD-2e will remember the
position at which playback was stopped.
Operation When Resume is On
CD-2e_e.book 61 ページ ２００７年１０月２４日 水曜日 午前１１時１６分