Omega Speaker Systems High Speed Load Cell Interface Card LCIC-WIM-BEN - Manual (Page 11)

10
3. Utilities
3.1 Setup & Running
1. Run the setup(s) of the LCIC-WIM utilities in the folders:
* LCIC-WIM-CALIBRATION
* LCIC-WIM-SETTINGS
2. Run a utility:
* If the utility reports that .Net Framework is not
installed, then run "dotnetfxV1.1.4322.exe" in the
"Microsoft Net Framework" folder on your CD.
* If the utility reports "LCIC driver is not installed", then refer
to the previous section (“Installing the board in the PC”).