Omega Speaker Systems High Speed Load Cell Interface Card LCIC-WIM-BEN - Manual (Page 18)

17
3.2.2 The Calibrations Library
Each calibration that the user applies may be saved in the ‘Calibrations
Library’. Later on, the user may use that library as a short cut in order to
restore
a previous calibration quickly and reliably.
The procedure is very simple:
Save
Unless the ‘Save to Library’ box is unchecked, each calibration is
automatically saved to the library upon its saving to the board in Step 5.
Its name is the ‘Calibration Name’ parameter.
Restore
In order to restore a calibration from the library to the board, press
‘Library’ in Step 2, and select the required calibration file (e.g., IMS.Lbr
in the example below). You may watch (but not change) the selected
calibration’s parameters. Clicking ‘Save to Board and Exit’ will restore
the selected calibration to the board. Unnecessary calibration may be
erased by clicking the ‘Delete’ button.