Omega Speaker Systems High Speed Load Cell Interface Card LCIC-WIM-BEN - Manual (Page 39)

38
4.3.2 Variables
The system has variables with which the user may adjust the system to
his needs and communicate with the I/O. Actually these variables consist
of parameters, inputs and outputs. A variable may be read and sometimes
also may be written. The table below lists the variables, describes them
and specifies which of them may be also written.
The methods to read and write a variable are:
Read:
Get_Variable(r<Variable Name>)
Returns a string with the value of the variable.
r<Variable Name>
is the variable name as it appears in the table below,
prefixed by ‘r’ for read, e.g., rOutput_1_Mode.
Write:
Set_Variable(w<Variable Name>, Value)
w<Variable Name>
is the variable name as it appears in the table below,
prefixed by ‘w’ for write, e.g., wOutput_1_Mode.
Value
is a string with the value of the value to be written to the variable.