Teledyne 460H - Manual (Page 11)

2.0 Installation
Upon receiving the Model 460H please verify that there is no apparent shipping damage.
(If damage has occurred please advise shipper first, then Teledyne API.)
2.1 Mechanical Installation
1. Mount the enclosure securely to a vertical surface. Figure 2-1 below shows the
locations of the four mounting holes. All four mounting holes should be used to
secure the monitor.
6.050 [153.67]
10.700 [271.78]
Figure 2-1 Mounting Hole Locations
P/N 03662D Teledyne API Model 460H O3 Monitor Operator Manual - Page 11