4 command reference, 1 cauto, Syntax – Teledyne 460H User Manual
Page 23: Description, Data parameters sent, Response, Ommand, Eference
Advertising
5.4 Command Reference
5.4.1 CAUTO
Syntax
<address>CAUTO<CR>
Description
Perform an Auto-Zero Calibration. Valid only if Auto-Zero option is installed in
monitor.
Data Parameters Sent
None
Response
<address>:<success_flag>#<checksum><CR>
Example
Command:
1CAUTO<CR>
Response:
1:OK#261<CR>
- Calibration Successful
1:FAIL#391<CR>
- Calibration Failed
P/N 03662D Teledyne API Model 460H O3 Monitor Operator Manual - Page 23
Advertising