Teledyne 460H - Manual (Page 22)

Examples of valid Commands with no data:
Checksum
Included:
1O3#179<CR>
No Checksum:
1O3<CR>
Examples of valid Commands with data:
Checksum
Included:
1VSET:1,20#620<CR>
No
Checksum:
1VSET:1,20<CR>
5.3 Command Summary
Table 5-2 below lists the commands available and a summary of their function.
Table 5-2 Serial Port Command Summary
Command Description
CAUTO Perform an Auto-Zero Calibration (if option is installed)
CZERO Perform a manual zero calibration (zero calibration is
computed based on current O3 reading in cell)
DACSTEP Analog Output Test Mode, Step Function
O3 Returns current O3 concentration
SETADDR Set communications address
TDUMP Returns a compact list of current measurement parameters
TLIST Returns all current measurement parameters
VGET Get Single VAR value
VLIST Lists all internal VARS
VSET Sets value of internal VAR
P/N 03662D Teledyne API Model 460H O3 Monitor Operator Manual - Page 22