Texas Instruments TMS320C6454 - Manual (Page 122)

www.ti.com
PRODUCT PREVIEW
CLKIN1
CLKIN2
POR
RESET (A)(B)
RESETSTAT
Boot and
Device Configuration Pins (C)
9
7
6
8
TMS320C6454
Fixed-Point Digital Signal Processor
SPRS311A – APRIL 2006 – REVISED DECEMBER 2006
A. RESET should only be used after device has been powered up. For more details on the use of the RESET pin, see
Section 7.6 , Reset Controller.
B. A reset signal is generated internally during a Warm Reset. This internal reset signal has the same effect as the
RESET pin during a Warm Reset.
C. Boot and Device Configurations Inputs (during reset) include: AEA[19:0], ABA[1:0], and PCI_EN.
Figure 7-9. Warm Reset Timing
122 C64x+ Peripheral Information and Electrical Specifications Submit Documentation Feedback