TANDBERG TT1260 - Manual (Page 113)

Technical Specification
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-21
ST.TM.E10100.1
B.9 Compliance 14
B.9.1 Safety
This equipment has been designed and tested to meet the requirements of
the following:
EN 60950 European Safety of information technology
equipment including business equipment.
IEC 60950 International Safety of information technology
equipment including business equipment.
In addition, the product has been designed to meet the following:
UL 1950 USA Safety of information technology
equipment including business equipment.
B.9.2 EMC 15
This equipment has been designed and tested to meet the following:
EN 55022 European Emission Standard
Limits and methods of measurement of
radio frequency interference
characteristics of information technology
equipment – 1998 Class B.
AS/NZS 3548 Australia/
NZ
Electromagnetic Interference - Limits and
Methods of Measurement of Information
Technology Equipment
EN55024 European Information technology equipment -
Immunity characteristics - Limits and
methods of measurement
EN 61000-3-2 16 European Electromagnetic Compatibility (EMC), Part
3 Limits; Section 2. Limits for harmonic
current emissions (equipment input
current £16 A per phase).
EN 61000-3-3 17 European Electromagnetic Compatibility (EMC), Part
3. Limits; Section 3. Limitation of voltage
fluctuations and flicker in low voltage
supply systems for equipment with rated
current £ 16 A.
FCC USA Conducted and radiated emission limits for
a Class A digital device, pursuant to the
Code of Federal Regulations (CFR) Title
47-Telecommunications, Part 15: Radio
frequency devices, subpart B -
Unintentional Radiators.
14 The version of the standards shown is that applicable at the time of manufacture.
15 The EMC tests were performed with the Technical earth attached, and configured using recommended cables.
16 AC versions only.
17 AC versions only.