TANDBERG TT1260 - Manual (Page 133)

Menus
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-19
ST.TM.E10100.1
C.9 System Menu (#6)
Table C.30: System Menu
Display title: System Description Section
Setup The Setup submenu allows the user to edit the operating mode,
LCD contrast, serial remote protocol, IP address, subnet mask,
service hunt mode, and the customisation key. C.9.1
IRD Details The IRD Details submenu diplays the software, firmware,
hardware, PLD version and electronic serial number of the IRD. C.9.2
System Restart The System Restart submenu allows the user to restart the unit. C.9.3
C.9.1 Setup Menu
The Setup submenu allows the user to edit the operating mode, LCD
contrast, serial remote protocol, IP address, subnet mask, service hunt
mode, and the customisation key.
Table C.31: Setup Menu
Display title: Setup Description
Date: XX/XX/XXXX
Time: YY:YY:YY XX/XX/XXXX is the system date from the TDT
YY:YY:YY is the system time from the TDT
Operating Mode
XXXXXXXXXXXXX XXXXXXXXXXXXX is editable:
FRONT PANEL
SERIAL REMOTE
DIRECTOR NCP
LCD Contrast XXXXXX XXXXXX is editable in the range:
LOW
MEDIUM
HIGH
Serial Remote Protocol
XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX is editable:
RS232 TTV, RS232 ALTEIA AT ADDR YYY, RS485 ALTEIA AT ADDR YYY
where YYY is IRD address from 000 to 999.
IP Address
XX.XX.XX.XX.XX.XX XX.XX.XX.XX.XX.XX is the editable IP address
Subnet Mask
XX.XX.XX.XX.XX.XX XX.XX.XX.XX.XX.XX is the editable subnet mask
Restore System Defaults Restores system defaults.
Service Hunt Mode
XXXXXXXX XXXXXXXX is the editable parameter for setting automatic service selection
(ENABLED, DISABLED)
Customisation Key
XXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX is the editable parameter for entering
customisation keys