TANDBERG TT1260 - Manual (Page 68)

Options
Page 5-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
5.2.3 Connector Details
Provides a DVB-compliant copper connection.
The input supports both byte-mode and single
packet burst mode and is activated through the
Input Menu (#2). The specification for these
connectors are given in Section B.4.3.
ASI IN 1/2
Table 5.2: DVB-ASI Copper Connector (2 off)
Item Specification
Connector type BNC 75 W socket
Connector designations ASI IN 1
ASI IN 2
Cable specification Capable of transmitting a maximum frequency of 850 MHz
Pin Centre
Shield Signal
Ground/Chassis
5.3 QPSK Input Card (TT1260/HWO/QPSK)
5.3.1 General
The QPSK Input Card supports QPSK demodulation for Satellite Receivers
with two L-band inputs.
5.3.2 Rear Panel View
Figure 5.3: QPSK Input Card Rear Panel